Hotpoint CBRA 640 X S Installation, min. 20 mm mm5 COMPARTMENT min. 40 mm, 5 mm, Fan-Assisted

Models: CRA 641 D C KSC 640 X S CBRA 640 X S

1 16
Download 16 pages 4.57 Kb
Page 3
Image 3
Installation

Installation

!Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.

!Please keep these operating instructions for future reference. Pass them on to any new owners of the appliance.

Positioning

!Keep all packaging material out of the reach of children. It may present a choking or suffocation hazard (see Precautions and tips).

!The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may cause harm to people and animals or may damage property.

Built-in appliance

Use a suitable cabinet to ensure that the appliance functions properly.

The supporting surface must be heat-resistant up to a temperature of approximately 100°C.

If the appliance is to be installed above an oven, the oven must be equipped with a forced ventilation cooling system.

Avoid installing the hob above a dishwasher: if this cannot be avoided, place a waterproof separation device between the two appliances.

Depending on the hob you want to install, the cabinet must have the following dimensions (see figure):

 

 

590

 

48

 

 

 

 

 

 

520

 

 

 

1

 

 

 

-

560

 

490

+/

+/-

 

 

 

 

1

 

 

Ventilation

To allow adequate ventilation and to avoid overheating of the surrounding surfaces the hob should be positioned as follows:

At a minimum distance of 40 mm from the back panel.

So that a minimum distance of 20 mm is maintained between the installation cavity and the cabinet underneath.

Kitchen cabinets adjacent to the appliance and taller than the top of the hob must be at least 600 mm

from the edge of the hob.

min. 20 mm

mm5 Built-in appliance COMPARTMENT

min. 40 mm

min. 20 mm

5 mm

FAN-ASSISTED

OVEN

min. 40 mm

FRONT SIDE

OF HOB

SUPPORTING

 

 

SURFACE

30

 

 

40

UNDERSIDE

OF HOB

GB

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

3

Page 3
Image 3
Hotpoint CBRA 640 X S Installation, min. 20 mm mm5 COMPARTMENT min. 40 mm, 5 mm, Fan-Assisted, Oven, Built-in appliance