Hotpoint CRA 641 D C manual Three-phase, Connecting the electricity supply cable to the mains

Voltage and	Electrical connections	Terminal board
mains frequency
400V 3-N ~		Three-phase 400
50/60 Hz

5.Secure the power supply cable by fastening the cable clamp screw, then put the cover back on.

• The appliance is earthed and the plug is compliant	GB
with the law.

•	The socket can withstand the maximum power of
	the appliance, which is indicated on the data plate
	located on the appliance itself.
•	The voltage falls within the range of values indicated
	on the data plate.

Phase	Phase	Phase
1	2	3
	5	4

Three-phase 400

• The socket is compatible with the plug of the

appliance. If the socket is incompatible with the

plug, ask an authorised technician to replace it. Do

not use extension cords or multiple sockets.

! Once the appliance has been installed, the power

supply cable and the electrical socket must be easily

accessible.

Earth	Neutral	U-bolt
		connection support

Connecting the electricity supply cable to the mains

If the appliance is being connected directly to the electricity mains an omnipolar switch must be installed with a minimum opening of 3 mm between contacts.

!The installer must ensure that the correct electrical connection has been made and that it is fully compliant with safety regulations.

Before connecting the appliance to the power supply, make sure that:

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced

by authorised technicians only.

! The manufacturer declines any liability should

these safety measures not be observed.

! Do not remove or replace the power supply cable

for any reason. Its removal or replacement will void

the warranty and the CE marking. INDESIT does not

assume liability for accidents or damage arising from

replacement/removal of the original power supply

cable. Replacement can only be accepted when

carried out by personnel authorised by INDESIT and

using an original spare part.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

5