NovaJet 800 Series Service Manual

7.Remove the Floating Carriage Cover from the Left and Right Support Brackets. The Floating Carriage Cover is part of the Ink Delivery System. See Figure 5-13.

8.Carefully slide the Ink Delivery System out of the left side of the printer.

Install the Ink Delivery System

1.Carefully slide the Ink Delivery System into the printer.

2.Secure the Floating Carriage Cover to the Left and Right Support Brackets. Torque to 6 in-lbs.

3.Secure the Ink Delivery System Bracket to the Left Frame. Torque to 15 in-lbs.

4.Secure the Ink Delivery System to the Chain Support Bracket. See item B in Figure 5-11. Torque to 15 in-lbs.

5.Reattach the Chain Support Bracket to the Rear Support Bracket. See item A in Figure 5-11. Torque to 15 in-lbs.

6.Secure the Fitting Mount Bracket (left portion of the Ink Delivery System) to the Left Frame using six screws. Torque to 15 in-lbs.

7.Install the Top, Left and Right Covers following procedures outlined earlier in this chapter.

Remove the Carriage Assembly, Carriage Belt, and the Frame Tensioner

1.Remove the Top, Left and Right Covers and the Ink Delivery System following procedures outlined earlier in this chapter.

2.Obtain the Belt Removal Tool, spin the movable side to shorten the distance between the two brass pieces.

3.Insert the Belt Removal Tool between the Left Frame Assembly and the Frame Tensioner. See Figure 5-14. Ensure that the movable side is against the Left Frame Assembly and the non-movable side is against the Frame Tensioner.

Assembly\Disassembly 5-23

Page 227
Image 227
Kodak 800 SERIES service manual Install the Ink Delivery System