Kodak 800 SERIES Inst all the Lower Roller Assembly, Stepper Motor and Vacuum Fan (NovaJet 850)

NovaJet 800 Series Service Manual
Assembly\Disassembly 5-51
13. Remove the S tepper Motor Extension Spring from the S tepper Motor
and the post on the Left Lower Drive Shaft Bracket. See Figure 5-30.
ATTACH SPRING
TO POST
ON BRACKET
Figure 5-30. Stepper Motor Removal/Installation.
14. Remove the hardware securing the S tepper Motor to the Left Lower
Drive Shaft Bracket and remove the S tepper Motor.
Inst all the Lower Roller Assembly, Stepper Motor and Vacuum Fan
(NovaJet 850)
1. Loosely attach the S tepper Motor to the Lower Roller bracket using
Stepper Motor hardware as shown in Figure 5-30.
2. Attach the S tepper Motor tension spring to the S tepper Motor and the
Lower Roller Bracket. T ighten the Stepper Motor hardware to 8 in-lb of
torque.
CAUTION
It may be necessary to loosen (do not remove) the screws
that secure the Y-Arm Assembly to the Platen so that the
Lower Drive Roller Assembly clears the ends of the screws