Kodak 800 SERIES Remove the Service Station

Assembly\Disassembly 5-40

NovaJet 800 Series Service Manual

Figure 5-25. Carriage Bushing Installation.

6. Orient the new bushing as shown in Figure 5-25 so that the metal tab

on top of the bushing goes into the Carriage Assembly first.

7. Push the bushings in until they snap into place.

8. Install the Carriage Assembly and Ink Delivery System following

procedures outlined earlier in this chapter .

9. Install the Top, Left and Right Covers following procedures outlined

earlier in this chapter .

Remove the Service Station

SERVICE

STATION RELEASE

TAB

Figure 5-26. Service Station Removal.

1. Place the Top Cover in the open position.

2. Move the Carriage Assembly to the left side of the Slide Shaf t.

3. Reach into the Right Cover and pull back on the Service Station

release tab located on the far side of the Service S tation. See Figure

5-26.

4. Raise the right side of the Service S tation out of the Platen.