Kodak 800 SERIES service manual

NovaJet 800 Series Service Manual

that protrude inside of the Platen while installing the Lower Drive Roller Assembly.

CAUTION

It may be necessary to loosen (do not remove) the screws that secure the left Leg Assembly to the Platen so that the Lower Drive Roller Assembly clears the ends of the screws that protrude inside of the Platen when removing the Lower Drive Roller Assembly.

NOTE

Ensure that the Lower Drive Supports and Fan Assem- blies are oriented in the correct position before inserting into the Platen.

3.Slide the right side of the Lower Drive Roller Assembly inside of the left side of the Platen until the first roller is inserted.

4.Position and hold one of the Fan Assemblies under the Lower Drive Roller Assembly and between the first and second rollers. Continue to insert the Lower Drive Roller Assembly into the Platen.

5.Position and hold the other Fan Assembly (for 60 inch model only) under the Lower Drive Roller Assembly. Continue to insert the Lower Drive Roller Assembly completely into the Platen.

6.Reaching inside the Fan Exhaust hole under the Platen, position and secure the Fan Assembly(ies).

7.Reinstall the Fan Exhaust Assembly(ies).

8.Install the Lower Drive Roller Assembly Left and Right Support Brackets.

9.Install the Center Support Bracket. Insert the Platen Plug.

Assembly\Disassembly 5-52