Kodak 800 SERIES service manual Assembly\Disassembly5, Introduction

Assembly\Disassembly5

Introduction

Chapter 5 contains the procedures for removal and replacement of the NovaJet 800 series printer assemblies and mechanisms. Illustrations are provided for clarity. Steps for each replaceable part may depend on parts already removed in previous disassembly directions. It is recommended that you read through each procedure before beginning the removal and replacement of any assemblies or mechanisms.

The following tools are recommended to disassemble and reassemble the printer:

•#1 Phillips Torque Screwdriver

•#2 Phillips Torque Screwdriver

•#1 Slotted Torque Screwdriver

•#2 Slotted Torque Screwdriver

•#1 Phillips Screwdriver

•#2 Phillips Screwdriver

•#1 Slotted Screwdriver

•#2 Slotted Screwdriver

•Wrench, 1/4”

•Screwdriver, Socket Head, 1/4”

•Wire Cutters

•Needle Nose Pliers

•X-ACTO Knife

•ESD Wrist Strap

The following materials are also required:

•Isopropyl Alcohol

•Cotton Swabs

•Lint Free Cloth or Tissue

•Double Sided Tape (1/16” thick, 3/4” wide)

•Loctite Blackmax, P/N 200172

5-1