NovaJet 800 Series Service Manual

Remove the Keypad and Display

1.Remove the Top and Right Covers following procedures outlined earlier in this chapter.

2.Turn the Right Cover Assembly over and with a 1/4” socket or wrench, remove the four kepnuts securing the ESD Shield and ground connections. See Figure 5-4. Remove the ESD Shield.

3.With a 1/4” socket or wrench, remove the four standoffs and washers that secure the LCD Display Assembly to the Keypad. Remove the Display Assembly.

Figure 5-4. Keypad and Display Installation/Removal.

Assembly\Disassembly 5-8

Page 212
Image 212
Kodak 800 SERIES service manual Remove the Keypad and Display, Keypad and Display Installation/Removal