Kodak 800 SERIES service manual This assembly emits heat by radiation

NovaJet 800 Series Service Manual

WARNING

This assembly emits heat by radiation.

1.Disconnect the Thermal Dryer Assembly power cord from the back of the printer.

2.Disconnect the data cable from the right side of the Thermal Dryer Assembly.

3.Locate and remove the four screws securing the Thermal Dryer Right Endcap Assembly. See Figure 5-35.

Figure 5-35. Dryer Right Endcap Removal/Installation.

4.Carefully pull the Right Endcap Assembly away from the main body of the Thermal Dryer Assembly until access is gained to disconnect the connections going to the Printed Wiring Assembly.

Assembly\Disassembly 5-63