Kodak 800 SERIES service manual Measure

NovaJet 800 Series Service Manual

MEASURE	MEASURE		MEASURE
FIRST		LAST	SECOND

ADJUST IF

NECESSARY

Figure 3-12. Measurement Positions for Slide Shaft.

3.Measure the right side (next to media alignment mark) and note the difference. Divide this amount by two.

4.Measure just off the center of the slide shaft and adjust the center turnbuckle with an open ended wrench if required, for the average value (the value found in step 3.) See Figure 3-13.

NOTE

The NovaJet 850 60 inch model has two turnbuckles, so both of these need to be adjusted together for the center position.

Maintenance 3-26