POSIFLEX Business Machines PD-7200 III. Installation, Signal connection, Power connection

4 pin Telephone Jack

III. INSTALLATION

A. Signal connection

Connect the DB9 female connector of the signal cable CCBLA - 372 to the COM port of the host computer or POS system and connect the DB9 male connector of the signal cable CCBLA – 372 to the DB9 female connector in the base of the PD.

B. Power connection

1. Using power adaptor

Please place the base of the PD-7100/7200 series on a horizontal surface. Check that the power adaptor must meet the specification of the city power and then plug the adapter into city power outlet. Prepare to turn on the power switch at base of the PD.

2. Using power from PC

I/O Plate of CCBLA-141

Switching Power Supply Unit

Install the cable CCBLA-141 with I/O plate in the power kit into the hosting PC for obtaining DC power as shown in the left drawing. However, it is absolutely important to

		turn all the power off
		before removing any case
4 pin Power		or connecting	any cable.
	Inside view of	Followings are step-by-step
CCBLA-141 connector	example PC	instructions for	installing

this cable.

1.Make sure the PC to supply power is turned off.

2.Open the case of PC according to its relevant manual.

3 - 1