Kodak 800 SERIES service manual Remove the Carriage PWA

NovaJet 800 Series Service Manual

22.Turn the Belt Removal Tool to tighten the belt around the Servo Motor pulley.

23.Move the Carriage Assembly back and forth to check the Carriage Belt tension. Remove the Belt Removal Tool.

24.Gently move the Carriage Assembly from end to end and make sure that the Carriage Belt is not binding

25.Install the Ink Delivery System following procedures outlined earlier in this chapter.

26.Install the Top, Left and Right Covers following procedures outlined earlier in this chapter.

Remove the Carriage PWA

CAUTION

Integrated circuits may become weakened or damaged by electrical discharge. Do not touch or work near integrated circuits without wearing an ESD wrist strap.

1.Remove the Top, Left and Right Covers following procedures outlined earlier in this chapter.

2.Remove the Ink Delivery System and the Carriage Assembly following procedures outlined earlier in this chapter to remove the Carriage Assembly from the Slide Shaft.

3.Put on an ESD wrist strap.

4.Unlock the connectors and remove all flex cables on the Carriage PWA.

Assembly\Disassembly 5-31