Kodak 800 SERIES To perform the Color Calibration, Vert. and Horiz. Color Calibration

NovaJet 800 Series Service Manual

Y

M

C

COLOR VERTICAL HEAD-TO-HEAD CALIBRATION

													C
													M
													Y
-6	-5	-4	-3	-2	-1	0	1	2	3	4	5	6

COLOR HORIZONTAL HEAD-TO-HEAD CALIBRATION

Current Heads (Y, M, C)

Figure 3-18. Vert. and Horiz. Color Calibration.

The “Current Heads (Y, M, C, 1, 2, 3, 4)” view represents the alignment of the heads as they are currently entered. This is just an overview of all heads and how they are aligned. Do not attempt to align the heads using this view.

The “Color Horizontal Head-to-Head Calibration” checks the alignment of the nozzles horizontally and allows corrections when required. Just enter the value below the set of lines that are correctly aligned. Be careful that you are aligning the correct color by observing the K (black) C (cyan), M (magenta), Y (yellow), 1, 2, 3, and 4 (1-4 are assigned colors) on the right side of the plot.

The “Color Vertical Head-to-Head Calibration” checks the alignment of the nozzles vertically and allows corrections when required. Just enter the value below the set of lines that are correctly aligned. Be careful that you are aligning the correct color by observing the K (black), C (cyan), M (magenta), Y (yellow), 1, 2, 3, and 4 (1-4 are assigned colors) on the right side of the plot.

To perform the Color Calibration:

1.Select “Utility Menu” from the Main Menu. This brings up the Utility Menu as shown in Figure 3-19.

Maintenance 3-32