Kodak 800 SERIES service manual Carriage Belt Clamp

NovaJet 800 Series Service Manual

BUMP

CARRIAGE BELT

RIGHT POST OF

BELT CLAMP

LEFT POST OF

BELT CLAMP

Figure 5-17. Carriage Belt Clamp.

13.To disengage the Carriage Belt from the Belt Clamp, push the Carriage Belt away from the left post of the Belt Clamp and gently lift up until the bottom edge of the Carriage Belt clears the top of the left post.

14.Push the Carriage Belt away from the right post of the Belt Clamp and gently lift up to finish removing the Carriage Belt from the Belt Clamp.

CAUTION

Failure to use an approved antistatic bag for storage or shipment may cause damage to the Carriage PWA and affect the Warranty.

15.Place the Carriage(s) in an ESD (antistatic) bag in preparation for shipment to ENCAD for replacement or repair, or if it is to be stored for repair at your facility.

Assembly\Disassembly 5-27