Kodak 800 SERIES service manual Troubleshooting, No Power

NovaJet 800 Series Service Manual

Troubleshooting 4

Introduction

Chapter 4, Troubleshooting consists of a table that is intended to aide the technician in troubleshooting the NovaJet 800 series printers. This table addresses symptoms with their possible causes and solutions.

Basic troubleshooting skills will be required to perform the symptom identification, troubleshooting, fault isolation, and repair of the printer when using this table.

Ensure that all applicable software diagnostic tests have been properly executed, all visual indications (including LED status) have been observed, and all applicable pushbuttons have been depressed to obtain a complete list of symptoms to be applied to the table below.

Use the table in conjunction with Chapter 3, Maintenance, whenever the table prompts you for additional information. This information may be in the form of an illustration, additional data, or a procedure that needs to be performed.

Table 4-1. Troubleshooting Table.

Symptoms Possible cause Solution

No Power

• printer not ON	depress power
	switch
• faulty power	replace power cord
cord
• AC input not	replace AC entry

Troubleshooting 4-1