Kodak 800 SERIES Media Sen Ref. Pts Not Initialized NJ880 only, Image Skews or Moves

NovaJet 800 Series Service Manual

Table 4-1. Troubleshooting Table (cont).

Symptoms	Possible cause	Solution
Media Sen Ref. Pts
Not Initialized
(NJ880 only)
	• reference points	reset all eleven refer-
	were accidentally	ence p9oints by per-
	cleared	forming the Media
		Ref Pts. Alignment
Image Skews or
Moves	• dirty encoder	clean encoder
	strip	strip (top and
		bottom)
	• defective encoder	replace encoder
	strip	strip
Does Not Print	• bad connection	reseat cable
	between computer	connections on
	and printer	computer and
		printer
	• firmware is	refresh EEPROM
	corrupted	firmware with new
		download (in contin-
		uous run state)
	• defective trailing	replace trailing
	cable assy.	cable assy.
	• faulty quad flex	replace quad flex
	cable (either left	cable or complete
	or right carriage	carriage assembly
	assembly.)

Troubleshooting4-8