Kodak 800 SERIES service manual Cartridge JET Plate

NovaJet 800 Series Service Manual

CARTRIDGE

JET PLATE

PLATEN HEAD HEIGHT

Figure 3-14. Carriage Head Height Tolerance.

1.Remove the lid and the right cover of the printer. See Chapter 5 for procedures.

2.Obtain the 3 tools (Micrometer Dial Gauge, Test Cartridge, and Measuring Tip Extender) from the Height Gauge Kit. Obtain the Head Height Alignment Plate. Assemble the tools as shown in Figure

3-15.

SPIN HEAD ON	MICROMETER
MICROMETER GAUGE
TO FACE BACKWARDS	DIAL GAUGE

TIGHTEN SET

SCREWS

TEST CARTRIDGE

MEASURING

TIP EXTENDER

ENSURE TIP EXTENDS BELOW CARTRIDGE 1/4" (6mm)

Figure 3-15. Setting Up Tools from Height Gauge Kit.

Maintenance 3-28