NovaJet 800 Series Service Manual

Figure 4-3. Dirty Service Station.

5.Are there any signs of leaking ink on or below the inkjet carrier assembly? This would indicate an air leak is in the ink delivery system. Ensure the septum connector fittings (3 parts make up the septum connector) are tight. Check all fittings. Replace cartridge septum connector and tubing needle, reservoir tubing needle, and female valve as necessary.

Figure 4-4. Septum and Valves.

6.Replace cartridge (printhead) and re-prime according to the Priming Procedures.

7.Is the flex driver cable connections seated properly at carriage

Troubleshooting 4-21

Page 120
Image 120
Kodak 800 SERIES service manual Dirty Service Station