Kodak 800 SERIES service manual Install the Thermal Dryer Assembly

NovaJet 800 Series Service Manual

Install the Thermal Dryer Assembly

1.Carefully place the Thermal Dryer Assembly onto the support brackets. See Figure 5-34. Secure and torque to 15 in-lbs.

2.Attach the data cable to the right side of the Thermal Dryer Assembly.

3.Attach the Thermal Dryer Assembly power cord the to back of the printer.

Remove the Thermal Dryer Right Endcap Assembly

NOTE

The Thermal Dryer Right Endcap Assembly contains the

Printed Wiring Assembly for the Dryer.

WARNING

Once the dryer is plugged in, there is continuous power being applied to the dryer, even when the printer is

turned off.

DISCONNECT POWER CORD BEFORE SERVICING!

Assembly\Disassembly 5-62