Kodak 800 SERIES service manual

NovaJet 800 Series Service Manual

Remove the Media Take-Up and Feed Sensor Brackets and Sensors

NOTE

The sensors for the media Take-Up and Feed Assembly are identical, but the brackets that they mount to have dis- tinct differences. The top bracket has an additional ex- tended arm attached to help in directing the media from blocking the sensor’s beam path. Ensure that the bracket is being replaced with the correct bracket.

1.Remove all media and media rollers from the printer.

2.Disconnect the sensor leads from the printers leg assembly by squeezing the sides of the connector to release the quick disconnect latches.

3.With a pair of wire cutters, cut the wire tie wraps (see Figure 5-32) that is securing the sensor leads to the sensor bracket.

4.Remove the sensor by unscrewing the plastic nut off of the front of the sensor. Pull the sensor out of the bracket.

5.Remove the two screws securing the bracket to the leg

Assembly\Disassembly 5-58