NovaJet 800 Series Service Manual

Figure 4-70. Paper Sensor Location.

5.Ink on Paper Sensor (most common failure).

6.Trailing cable connections (reseat/replace cable – outer cable).

Encoder Sensor Error

The encoder sensor error typically happens when a break in continuity occurs in the flexible printed circuit (FPC) line at the encoder sensor assembly. The encoder sensor will need replacement should the error display. The encoder sensor assembly is connected to the carriage PCB at an angle and may be difficult to connect. During installation the connection must be secured or erratic carriage movement of the carriage assembly may occur at power up.

Figure 4-71. Encoder Sensor.

Troubleshooting 4-68

Page 167
Image 167
Kodak 800 SERIES service manual Encoder Sensor Error, Paper Sensor Location