Kodak 800 SERIES service manual Strain Relief Removal/Installation

NovaJet 800 Series Service Manual

LATCH

Figure 5-16. Strain Relief Removal/Installation.

9.Slide the Carriage Assembly to the left edge of the Slide Shaft while taking up the slack of the Belt at the same time.

NOTE

The Belt is connected to the right Carriage only. The left Carriage is directly connected to the right Carriage. The left Carriage moves with the right Carriage, which is driven by the Belt.

10.Slide the Carriage Assembly slowly off the left side of the Slide Shaft until the left Carriage slides off of the Slide Shaft and disconnects itself from the right Carriage. Place the left Carriage aside.

11.Slide the right Carriage and Drive Belt off the left side of the Slide Shaft.

12.Once the right Carriage is removed from the Slide Shaft, turn it over so that you can see the Belt Clamp. See Figure 5-17.

Assembly\Disassembly 5-26