Kodak 800 SERIES service manual To remove the Left Cover Assembly, Left Cover Removal/Installation

NovaJet 800 Series Service Manual

8.Disconnect the Display data ribbon cable connector at the J10 location on the Main PWA.

To remove the Left Cover Assembly:

1. Disconnect and remove all ink reservoirs.

Figure 5-2. Left Cover Removal/Installation.

2.Remove the two screws securing the Left Cover to the Left Frame. See the upper portion of Figure 5-2.

3.Reach under the Support Bracket and depress and hold the retracting stop assembly that secures the Left Cover to the Support Bracket.

4.Insert the tip of a flathead screwdriver into the gap between theLeft Cover and the Left Frame as shown in the lower portion of Figure 5-2 and twist. Insert and twist into as many gaps as necessary to loosen the cover from the frame.

5.Carefully lift the Left Cover up and off the printer.

Assembly\Disassembly 5-4