Kodak 800 SERIES service manual Replacing the Carriage Bushings, Carriage Bushing Removal

NovaJet 800 Series Service Manual

9.Perform the same procedure to replace the Right Support Bracket bushing.

Replacing the Carriage Bushings

1.Remove the Top, Left and Right Covers following procedures outlined earlier in this chapter.

2.Remove the Ink Delivery System and the Carriage Assembly following procedures outlined earlier in this chapter to remove the Carriage Assembly from the Slide Shaft.

Figure 5-24. Carriage Bushing Removal.

3.Use a flat tip screwdriver to push up on the latch which holds the Carriage bushing in place. See Figure 5-24.

4.Pull the Carriage bushing out of the Carriage.

5.Repeat these procedures for the other Carriage bushings.

Assembly\Disassembly 5-39