Kodak 800 SERIES service manual Replace Mpwa

NovaJet 800 Series Service Manual

Table 4-1. Troubleshooting Table (cont).

Symptoms

Fan Does Not

Power Up

Media Take-Up Motor Not Operat- ing, Sensor Works

Possible cause Solution

• MPWA has	1) reseat connection
24 VDC at J3	at MPWA to fan
pins 1-2	2) replace fan
• power not being	1) reload firmware
applied to fan	2) replace MPWA
• printer not in	put in Take-Up
Take-Up Mode	Mode (under
	“Supply Type” from
	“Paper Option
	Menu”)
• bad connection	reconnect Take-Up
to the motor	motor
• bad Take-Up	replace Take-Up
motor	motor
• faulty wiring leg	reseat or replace
harness	leg harness

• bad MPWA replace MPWA

Troubleshooting 4-16