Kodak 800 SERIES service manual

NovaJet 800 Series Service Manual

11.Remove the black flat-head screws from the top of the Platen that holds the left and right Drive Shaft Supports in place.

CAUTION

It may be necessary to loosen (do not remove) the screws that secure the Y-Arm Assembly to the Platen so that the Lower Drive Roller Assembly clears the ends of the screws that protrude inside of the Platen when removing the Lower Drive Roller Assembly.

CAUTION

It may be necessary to loosen (do not remove) the screws that secure the left Leg Assembly to the Platen so that the Lower Drive Roller Assembly clears the ends of the screws that protrude inside of the Platen when removing the Lower Drive Roller Assembly.

CAUTION

The Fan Assemblies will be removed at the same time that the Lower Drive Roller Assembly is removed. Exercise extreme care that the fan assemblies do not drop out of the Platen when removing the Lower Drive Roller Assembly.

12.Carefully slide the Lower Drive Roller Assembly (and the Fan Assemblies) out of the left side of the Platen.

Assembly\Disassembly 5-50