Kodak 800 SERIES service manual Remove the Stabilizer Bracket and Encoder Strip

NovaJet 800 Series Service Manual

6.Reposition the Floating Carriage Cover/Right Support Bracket Assembly and the Left Support Bracket around the Carriage Assembly. Secure the Left Support Bracket to the Floating Carriage Assembly. Torque to 15 in-lbs.

7.Install the Top and Right Covers following procedures outlined earlier in this chapter.

Remove the Stabilizer Bracket and Encoder Strip

1.Remove the Top, Left and Right Covers following procedures outlined earlier in this chapter.

2.Remove the Ink Delivery System, Carriage Assembly and Trailing Cable Assembly following procedures outlined earlier in this chapter.

3.Remove the Chain Support Bracket by slightly tilting the top of the Chain Support Bracket towards the front of the printer and lifting it straight up. See Figure 5-27.

CHAIN SUPPORT

BRACKET RESTS

ON THE TOP

OF THE Y-ARM

ASSEMBLY

Figure 5-27. Stabilizer Bracket Installation/Removal.

Assembly\Disassembly 5-43