Kodak 800 SERIES service manual Using the Belt Removal Tool

NovaJet 800 Series Service Manual

Figure 5-14. Using the Belt Removal Tool.

4.Turn the movable side so that the tool begins to expand and the Frame Tensioner Spring compresses. Continue to turn on the Belt Removal Tool until the belt can be lifted off of the Servo Motor pulley.

5.Turn the Belt Removal Tool in the opposite direction to remove the pressure exerted onto the Frame Tensioner. Remove the Belt Removal Tool. Remove the Frame Tensioner Assembly.

6.Remove the four screws securing the Left Frame Assembly and the Left Frame Assembly from the rest of the printer.

7.With a flathead screwdriver, press the left tab on the left Electronics Cover through the left Carriage Frame Assembly and remove the Electronics Cover. Perform the same procedure on the right Electronics Cover by pressing the right tab on the right Electronics Cover. See Figure 5-15.

Assembly\Disassembly 5-24