Bevel Cast Trim Surround
Model: LHEABSL
Steel Surround Panels
Models: LHE30SSB, LHE30SLB, LHE30SLGA
Read these instructions before beginning installa- tion.
Check Contents of Shipping Carton
Examine contents of shipping carton. If any parts are missing or damaged, contact your local dealer before starting installation.
Surround Parts
Trim kit assembly Trim mounting hood
Trim bottom (2) (not used on Montpelier Insert) Trim deflector (not used on Montpelier Insert) Hardware package
Installation Instructions
Install the Bevel Cast Trim Surround or Steel Sur- round Panels after all other installation work has been completed, thoroughly checked, and tested for proper operation, leaks and installation requirements.
1.Remove all plastic from trim kit.
2.Before installing trim kit, LHEABSL, some modifica- tions must be completed. Remove two (2) or four (4) wing nuts from the back of the trim kit and locate the trim mounting hood to the two (2) or four (4) outer holes. Fasten the wing nuts back in position. (Fig. 8)
Wing Nut
Trim |
|
|
Mounting | Use the Inner |
|
Hood | Mounting Holes | KT386 |
|
|
Fig. 8 Adjust trim mounting hood to correct hole location.
Assembly Instructions
1.Once the insert has been installed and tested for proper operation as directed, stand the Bevel Cast Trim Surround or Steel Surround Panels in front of the insert.
2.Position the surround in front of the insert and with the help of an assistant, gently lift the surround up and over the top sheet metal flange, at the same time, align the bottom brackets through the slots on the side flanges. (Fig. 9)
3.Adjust the surround, left to right, so there is an equal reveal on either side. Secure by applying downward pressure until the brackets have engaged onto the insert. (Fig. 9)
Assembly complete.
Top
Flange 
Side
Flange
KT1015
Fig. 9 Lift surround up and over top flange and up and through side flange holes.
6 | 30004451 |
