Assemble the Surround to the Insert

1.Before you install the Georgian Cast Surround to the Montpelier Insert, you must ﬁrst remove the top cast ﬁller. To do this remove the two (2) screws on the back side of the top ﬂange that hold the ﬁller in place. You can then install the unit onto the insert.

2.Once the insert is installed and tested for proper operation as directed, stand the Georgian Cast Sur- round in front of the insert.

3.Position the surround in front of the insert and with the help of an assistant, gently lift the surround up and over the top ﬂange, allowing the top brackets to hook over the ﬂange. At the same time, align the bot- tom brackets through the slots on the side ﬂanges. (Fig. 14)

4.Adjust the surround, left to right, so there is an equal reveal on either side. Secure by applying downward pressure until the brackets engage onto the insert.

(Fig. 14)

Assembly complete.

Figure 14

Remove Top

Filler