SET SALT LEVEL button | Display | UP button | SELECT button |
/
TANK LblGtH_ | ht_ A_T |
/ | \ |
|
REGENERATION button | LOW SALT indicator | DOWN button |
|
| Figure 15 |
PROGRAM THE SOFTENER | SET WATER HARDNESS NUMBER | |
When the transformer is plugged into the electrical out- let, the model code (350) and a test number (example: J3.0), are briefly shown in the display. Then the words "PRESENT TIME" appear and 12:00 PM begins to flash.
If you completed the previous step, the word "HARD- NESS" should show in the display. Otherwise, press the SELECT button several times until they do.
_C,UU
PRESENTTIME
I
Figure 16
SET PRESENT TIME OF DAY
If the words "PRESENT TIME" do not show in the dis-
play, press the SELECT button a few times until they do.
HARDNESS | Figure 18 |
1.Press the /X UP or V DOWN buttons to set the
hardness of your water supply, in grains per gallon. The default is 25.
NOTE: If your water supply contains iron, compensate for it by adding to the water hardness number. For example, assume your water is 20 gpg hard and contains 2 ppm iron. Add 5 to the hardness
I ' I
AM
r r.30
PRESENTTIMEPRESENTTIME
Figure 17
1.Press the /X UP or V DOWN buttons to set the
present time. Up moves the display ahead; down sets the time back. Be sure AM or PM is correct.
NOTE: Press buttons and quickly release to slowly
advance the display. Hold the buttons down for fast advance.
2.When the correct time is displayed, press the SELECT
button, and the display will change to show the "Hardness" screen.
number for each 1 ppm of iron. In this example, you would use 30 for your hardness number.
20 gpg hardness
2 | 10 +10 |
(times) | 30 HARDNESS NUMBER |
If your water supply contains iron, it is recom- mended that you clean your water softener resin bed at least every 6 months. Your local Sears store has Water Softener Cleaner (Part Number 34427) available.
2.When finished setting your water's hardness number, press the SELECT button, and the display will change to show the "Recharge Time" screen.
Questions? Call the Kenmore Water Line
12
