TANK LIGHT
To light the the inside of the salt storage tank, press the
TANK LIGHT button on the faceplate. Press this button again to turn the light off. It will also turn off automat- ically after 15 minutes.
Tank Light
Icon
WATERFLOWFigure 33
WATER FLOW THROUGH THE SOFTENER
If soft water is in use, the water flow bars continually scroll across the display. The bars scroll slowly when water flow is slow, and move faster as water flow increases. The flow bars do not show when all faucets
and water using appliances are off.
| Flow bars scroll when soft water is in use | |
| 6 | ]: 2 |
| 7 |
|
_4 | 5 |
|
8 |
| |
_3 | mm | |
_2 | WATERFLOW |
|
| WATERFLOW | |
Figure 34
RECHARGE TIME REMAINING & VALVE POSITION INDICATORS
One of the valve position indicators (Serv, Fill, Brine, Bkwsh, Rinse) is displayed while the softener is recharg- ing. RECHARGE flashes in the display and, beginning with Brine, the minutes of recharge remaining before return to service appears in place of the present time. When the valve is moving from one cycle to another, both position indicators are flashing.
Valve | Recharge | |
Time | ||
Position | ||
Remaining | ||
Indicator | ||
|
PROGRAM MEMORY
If electrical power to the softener goes off, the time dis- play is blank but the electronic controller keeps the cor- rect time for several hours. When electrical power comes on again, you will have to reset the present time only if the display is flashing. The HARDNESS and RECHARGE TIME never require resetting unless a change is desired. Even if the clock is incorrect after a long power outage, the softener works as it should to keep your water soft, however, regenerations may occur at the wrong time of day until you reset the clock to the correct time of day.
KENMORE'S ULTRA CLEANSING FEATURE
The ultra cleansing feature keeps larger particles of sediment from entering the home's plumbing system. As water passes through the softener, the larger sediment particles are collected in the integrated basket and
then rinsed to the drain before each regeneration. The ultra cleansing feature provides added protection for water using appliances by reducing the chance of larg- er particles entering the various products valves and screens. The "Clean Feature" may be turned ON to provide an extra backwash that will help keep the ultra cleansing screen clean. The default is OFF.
IMPORTANT: The ultra cleansing feature is not intended
to replace pretreatment filtration. For problem water applications, additional sediment filtration is recommended.
Sears offers a full line of dedicated sediment filtration products.
Ultra Cleansing Screen
Resin
Tank
7
Figure 35 | Top |
| Distributor |
| Figure 36 |
Questions? Call the Kenmore Water Line
18
