Woods Equipment DS96 Install Chain Shielding Optional, Optional Chain Shielding Installation

INSTALL CHAIN SHIELDING (OPTIONAL)

The optional chain shielding assemblies are ready for installation when you receive them.

1.Install front and rear chain shielding as shown using self-tapping screws (6), lock washers (7), and flat washers (8).

2.Attach front reflector bracket (9) over left front shield.

Full chain or rubber shielding must be installed when operating in populated areas or other areas where thrown objects could injure people or dam- age property.

•If this machine is not equipped with full chain or rubber shielding, operation must be stopped when anyone comes within 300 feet (92 m).

•This shielding is designed to reduce the risk of thrown objects. The mower deck and protec- tive devices cannot prevent all objects from escaping the blade enclosure in every mowing condition. It is possible for objects to ricochet and escape, traveling as much as 300 feet (92 m).

1. Front chain shield bracket

2. Rear chain shield bracket

3. Front chain pin

4. Rear chain pin

5. 5/16 Chain link

6. Self tapping screw, 3/8 x 1-1/4

7. Lock washer, 3/8

8. Flat washer, 3/8

9. Front reflector bracket

Figure 44. Optional Chain Shielding Installation

48 Assembly MAN0390 (Rev. 4/6/2007)