Woods Equipment DS120 33347E, Safety & Instructional Decals, Replace Immediately If Damaged

SAFETY & INSTRUCTIONAL DECALS

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Replace Immediately If Damaged!

13 - PN 1004991

1004991

WARNING

RAISED CUTTER CAN DROP AND CRUSH

Cutters must be equipped with transport lock.

stands.

All transport components must be functional, kept in good

Blocking up prevents cutter dropping from hydraulic leak down, hydraulic system failures, or mechanical component failures.

FAILURE TO FOLLOW INSTRUCTIONS CAN

RESULT IN SERIOUS INJURY OR DEATH.

TRANSPORT LOCK

AND CYLINDER REQUIREMENTS

SINGLE-ACTING FULL

EXTENSION

TRANSPORT

LOCK

14 - PN 19924

	WARNING
	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	Check for leaks with cardboard; never use hand.
	Before loosening fittings: lower load, release pressure, and
	￿be sure oil is cool.
19924-B	Consult physician immediately if skin penetration occurs.

PN 1006348

BE CAREFUL!

16 - PN 33347

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿33347E

Use a clean, damp cloth to clean safety decals.

Avoid spraying too close to decals when using a pressure washer; high-pressure water can enter through very small scratches or under edges of decals causing them to peel or come off.

Replacement safety decals can be ordered free from your Woods dealer. To locate your nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and Canada call 1-800-319-6637.

17 - PN 24611

SLOW MOVING VEHICLE EMBLEM

(Rev. 5/11/2007)

MAN0390 (Rev. 6/30/2006)

Safety 13