Corega 613-00041-01 manual BAR-WL Wireless Router External Power Adapter

1.1 Package Contents

Features

Your BAR-WL Wireless Router provides the following features:

•Allows multiple users to access Internet at the same time using a single public IP Address.

•Allows users on Ethernet LAN and wireless LAN to transfer data to each other through wireless-to-wire bridge.

•Provides wireless access roaming, best access point selection, loading balance, network traffic filtering included in wireless roaming function.

•Provides 64bits/128bits key WEP (Wired Equivalent Privacy) wireless data encryption to secure wireless communication.

•Fully supports 802.11 open and shared key authentication.

•Integrates four switched 10/100BASE-T/TX auto-sensing ports.

•Uses NAT to allow all of your network’s PCs to connect to the Internet using only one IP address.

•Supports PPPoE that enable users to seamlessly connect to ISPs with the user familiar “dial-up” type connection interface.

•Built-in web-based user interface for easy configuration and management.

•Supports DHCP client to receive both a dynamic IP Address and a fixed IP Address from ISP.

•Built-in DHCP server to automatically assign and manage LAN IP addresses.

•Block specific users from accessing specified web sites.

•Allows external Internet users to access information from the internal target host by setting the Virtual Server.

•Provides unrestricted two-way communication between one PC on your LAN and certain Internet services like conferencing, video and gaming applications.

1. Installing the BAR-WL Wireless Router

This chapter describes un-packing, familiarization, and the hardware installation of the BAR-WL Wireless Router.

1 x BAR-WL Wireless Router

1 x External Power Adapter

1 x Wall Mount Kit (2 screws and 2 wall plugs) 4 x Self Adhesive Rubber Feet

1 x Vertical Desk kit

1 x Ethernet Cable

1 x Installation Guide

ENGLISH

4