Here is an example of the IP Access Setting. Enter the range of 51~80 in the Filter Group column and 20~80 in the Block port Range column, then click “Apply” button. As the result, the user’s computers which have IP Addresses in the range of 192.168.1.51 to 192.168.1.80 will not be able to use the applications which use port numbers from 20 to 80, such as FTP, Telnet and web browsing.

2.12.2 URL Access Setting

URL Access Limit

Check “Enable” or “Disable” to make this function active or inactive.

Website Access

Check “Allow” to allow users on the network to access the specific websites listed. In contrast, to restrict users on the net work to access the website listed on the location, check “Block” in this item.

Block Access Website

Click the button of “Block Access Website” to edit the website list. Enter the website addresses to be accessed/blocked on the locations. Up to twenty website addresses can be entered into the locations

ENGLISH

22

Page 24
Image 24
Corega 613-00041-01 manual URL Access Setting, URL Access Limit, Website Access, Block Access Website