ViewSonic VS11439-3M manual Basic Setup, Led

Device

Buttons

ENGLISH

Basic Setup

1.Power on the A/V component you wish to setup, so that you can test codes by sending power off commands.

2.Refer to the Pre-programmed code tables and write down the code number listed.

3.Press and hold the button for the desire device for approximately six seconds. The top LED will turn on, enter pre-prammed code.LED will blink to indicate pre-

programmed code was captured code was captured correctly.

LED

Pre-Programmed Code Note

Record the three digital codes for your device here:

TV _________	VPB	_________
DVD _________	WMA	_________
STB _________	AUD	_________
VCR _________	AUX	_________

ViewSonic 14 N4261w