screen appears to allow you perform fine adjustments as required.

Note

[White Balance] is fixed to [Auto] in the following situations:

[Intelligent Auto]

[Superior Auto]

[Scene Selection]

[94] How to Use

Using shooting functions

Adjusting color tones

Capturing a basic white color in [Custom Setup] mode

In a scene where the ambient light consists of multiple types of light sources, it is recommended to use the custom white balance in order to accurately reproduce the whiteness.

1.MENU → (Camera Settings) → [White Balance] → [Custom Setup].

2.Hold the product so that the white area fully covers the AF area located in the center, and

then press on the center of the control wheel.

The calibrated values (Color Temperature and Color Filter) are displayed and registered.

Note

The message [Custom WB Error] indicates that the value is higher than the expected range, when the flash is used on a subject with too bright colors in the frame. If you register this

value, the indicator turns yellow on the recording information display. You can shoot at this point, but it is recommended that you set the white balance again to get a more accurate white balance value.

[95] How to Use Using shooting functions

Picture Effect

Selecting an effect mode

Select the desired effect filter to achieve more impressive and artistic images.

1. MENU → (Camera Settings) → [Picture Effect] → desired setting.

Menu item details

Page 92
Image 92
Sony ILCE6000LB, ILCE6000B manual Capturing a basic white color in Custom Setup mode, Picture Effect