Note

[ISO AUTO] is selected when using the following functions:

[Intelligent Auto]

[Superior Auto]

[Scene Selection]

[Sweep Panorama]

The higher the ISO value, the more noise will appear on the images.

When shooting movies, ISO values between ISO 100 and ISO 12800 are available. If the ISO value is set to larger value than ISO 12800, the setting is automatically switched to ISO 12800. When you finished the movie recording, the ISO value returns to the original settings. When you use [Multi Frame NR], it takes some time for the product to perform the overlay processing of images.

Hint

You can change the automatically set range of ISO sensitivity in the [ISO AUTO] setting. Select [ISO AUTO] and press the right side of the control wheel, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The settings [ISO AUTO Maximum] and [ISO AUTO Minimum] are also applied when shooting in [ISO AUTO] mode under [Multi Frame NR].

[90]How to Use Using shooting functions

Multi Frame NR

Selecting the ISO sensitivity

The product automatically shoots multiple images continuously, combines them, reduces the noise, and records them as one image. With multi frame noise reduction, you can select larger ISO numbers than the maximum ISO sensitivity. The image recorded is one combined image.

1.MENU → (Camera Settings) → [ISO] → [Multi Frame NR].

2.Press the right side of the control wheel to display the setting screen, then select a desired value using the top/bottom side of the control wheel.

Note

When [Quality] is set to [RAW] or [RAW & JPEG], this function cannot be used. The flash, [D-Range Opt.], and [Auto HDR] cannot be used.

Hint

You can change the automatically set range of ISO sensitivity in the [ISO AUTO] setting. Select [ISO AUTO] and press the right button, and set the desired values for [ISO AUTO

Page 88
Image 88
Sony ILCE6000LB, ILCE6000B manual Multi Frame NR