Sony ILCE6000B, ILCE6000LB manual Upload SettingsEye-Fi, Communication status screen display

[160] How to Use

Changing settings

Setup menu

Upload Settings(Eye-Fi)

Sets whether to use the upload function when using an Eye-Fi card (commercially available). This item appears when an Eye-Fi card is inserted into the product’s memory card slot.

1.MENU → (Setup) → [Upload Settings] → desired setting.

2.Set your Wi-Fi network or destination on the Eye-Fi card. For details, refer to the manual supplied with the Eye-Fi card.

3.Insert the Eye-Fi card you have set up into the product, and shoot still images. Images are transferred to your computer, etc., automatically via the Wi-Fi network.

Menu item details

On (default setting):

Enables the upload function.

Off:

Disables the upload function

Communication status screen display

: Standby. No images are to be sent.

: Upload standby.

: Connecting.

: Uploading.

: Error

Note

Eye-Fi cards are only sold in certain countries/regions.

For more information on Eye-Fi cards, please contact the manufacturer or vendor directly. Eye-Fi cards can be used only in the countries/regions where they were purchased. Use Eye-Fi cards in accordance with the law of the countries/regions where you purchased the card.

Eye-Fi cards are equipped with a wireless LAN function. Do not insert an Eye-Fi card into the product on an airplane. When an Eye-Fi card is inserted into the product, set [Upload

Settings] to [Off]. When the upload function is set to [Off], theindicator will be displayed on the product.

Power save mode will not function during uploading.

If (error) is displayed, remove the memory card and reinsert it, or turn the product off and then on again. If the indicator appears again, the Eye-Fi card may be damaged. Wireless LAN communication may be influenced by other communication devices. If the communication status is poor, move closer to the access point to be connected.

This product does not support Eye-Fi “Endless Memory Mode.” Before using an Eye-Fi card,