Sets the AF Track Duration to normal. This mode is useful when you want to keep the focus on a certain subject when there are some obstacles in front of the subject or in crowded places.
[70] How to Use
Using shooting functions
Adjusting the focus
Measuring the exact distance to the subject
The 
mark shows the location of the image sensor*. When you measure the exact distance between the product and the subject, refer to the position of the horizontal line.
The distance from the lens contact surface to the image sensor is about 18 mm (23/32 in.).
*The image sensor is the part that converts the light source to a digital signal.
Note
If the subject is closer than the minimum shooting distance of the lens, the focus cannot be confirmed. Make sure you put enough distance between the subject and the product.
[71] How to Use Using shooting functions
Exposure Comp.
Adjusting the exposure
Based on the exposure value set by auto exposure, you can make the entire image brighter or darker if you adjust [Exposure Comp.] to the plus side or minus side, respectively (exposure compensation). Normally, exposure is set automatically (auto exposure).
1.MENU → 
(Camera Settings) → [Exposure Comp.] → desired setting. You can adjust the exposure in a range of
