[273] Troubleshooting

Troubleshooting

Shooting still images/movies

The corners of the picture are too dark.

If any filter or hood is used, take it off and try shooting again. Depending on the thickness of the filter and improper attachment of the hood, the filter or the hood may partially appear in the image. The optical properties of some lenses may cause the periphery of the image to appear too dark (insufficient light). You may compensate for this phenomenon with [Shading Comp.].

[274] Troubleshooting

 

Troubleshooting

 

The image is blurred.

Shooting still images/movies

Activate the SteadyShot function by pressing the shutter button halfway down and then shoot images.

The picture was taken in a dark location without the flash, resulting in product-shake. The use of a tripod or the flash is recommended. [Hand-held Twilight] and [Anti Motion Blur] in [Scene Selection] are also effective in reducing blur.

[275] Troubleshooting

Troubleshooting

Shooting still images/movies

The LCD screen darkens after a short period of time passed.

If you do not operate the product for a certain period of time, the product switches to the power-save mode. The product exits power-save mode when you perform operations such as pressing the shutter button halfway.

[276] Troubleshooting

Troubleshooting

Shooting still images/movies

The flash takes too long to recharge.

The flash has been fired in succession in a short period. When the flash has been fired in

Page 198
Image 198
Sony ILCE6000LB, ILCE6000B manual Corners of the picture are too dark, Image is blurred, Flash takes too long to recharge