On:

Allows Wireless Remote Commander operation.

Off (default setting):

Does not allow Wireless Remote Commander operation.

Note

The RMT-DSLR1 Wireless Remote Commander cannot be used for movie recording. The lens or lens hood may block the remote sensor that receive the signals. Use the Wireless Remote Commander in the position from which the signal can reach the product. When [MOVIE Button] is set to [Off], the START/STOP button (Movie button) of the RMT- DSLR2 Wireless Remote Commander is not activated.

When [Remote Ctrl] is set to [On], the product does not switch to power save mode. Set [Remote Ctrl] to [Off] after using a Wireless Remote Commander.

[169]How to Use Changing settings

HDMI Resolution

Setup menu

When you connect the product to a High Definition (HD) TV with HDMI terminals using an HDMI cable (sold separately), you can select HDMI Resolution to output images to the TV.

1. MENU → (Setup) → [HDMI Resolution] → desired setting.

Menu item details

Auto (default setting):

The product automatically recognizes an HD TV and sets the output resolution.

1080p:

Outputs signals in HD picture quality (1080p).

1080i:

Outputs signals in HD picture quality (1080i).

Note

If the images are not displayed properly using the [Auto] setting, select either [1080i] or [1080p], based on which TV is to be connected.

[170] How to Use

Changing settings

Setup menu

CTRL FOR HDMI

Page 138
Image 138
Sony ILCE6000LB, ILCE6000B manual Hdmi Resolution, 1080p, 1080i