Mitsubishi Electronics WL639U Function Aspect Auto, Password Function, Menu Position, Setup Auto

Menu operation (continued)

3. FEATURE menu

opt.

FEATURE

ASPECTAUTO

PASSWORD	DISPLAY
FUNCTION	INPUT
MENU POSITION	1.

	CINEMA MODE	AUTO
?	VIDEO SIGNAL	AUTO

		SETUP	AUTO
		SCART INPUT	OFF
	A Ë	LANGUAGE	English
		RESET ALL	OK
ITEM				SETTING	FUNCTION
ASPECT				AUTO	Select to change the aspect ratio automatically depending on the input
			16:9		signal. (Select this option for normal use.)
					This option allows you to select the display position of squeezed (or
					horizontally compressed) images stored on DVD discs. By pressing the
					ENTER button, you can select the display position among CENTER,
					UPPER, and LOWER.
				REAL	Select to project images in their original size as input.
				FULL	Select to project images in full size (1280 x 800 pixels) irrespective
					of type of input signal.
PASSWORD FUNCTION					Use to enable or cancel the password lock. See page 33 for details.
MENU POSITION				 options	Use to change the position of the menu.
CINEMA MODE				AUTO	The film	mode	will	be	automatically activated when a film source signal is
					input.
				OFF	The film	mode	will	not	be activated.
VIDEO SIGNAL				8 options	When AUTO is selected, the appropriate video format is automatically
					selected depending on the input signal. If the image isn’t displayed
					correctly, select the desired video format manually.
SETUP				AUTO	Select to change the SETUP mode automatically.
				OFF	Select to make black lighter.
			3.75% / 7.5%		Select to make black thicker.

•When 7.5% is chosen, the brightness is decreased by the set-up can- cel function for the U.S. Choose OFF when the image is dark.

SCART INPUT	ON / OFF	Choose ON when connecting the projector with a device equipped with
		the SCART terminal that can output RGB signal. SCART terminal is used
		mainly in Europe. Choose OFF normally. (Available only for the input signal
		from the COMPUTER/COMPONENT VIDEO IN-1 terminal.)
LANGUAGE	10 languages	Use to select the language used in the menus.
RESET ALL	OK	Use to reset the settings of the menu (excluding IMAGE CAPTURE,
		PASSWORD FUNCTION and LANGUAGE) to the factory setting values.

•CINEMA MODE can be adjusted only when a TV60, TV50, 480i or 576i signal is being displayed.

•When SCART INPUT is set to ON, nothing is output to the external monitor.

•When SCART INPUT is set to ON, normal computer signals aren’t projected.

•Use a SCART-BNC (or SCART-Mini D-SUB 15-pin) cable (option) when connecting this projector with an AV device equipped with the SCART terminal.

•Some AV devices equipped with the SCART terminal aren’t compatible with this projector.

EN-25