Mitsubishi Electronics WL639U Specifications, Replacement part Option/Not included in the box

Specifications

The specifications and outside appearance of the projector are subject to change without prior notice.

Type			LCD projector
Model			WL639U
Display Technology			0.75-inch LCD panel: 3 pieces (for R,G,B)
			Pixel: 1280 x 800 = 1024000 pixels			Total 3072000 pixels
			Active pixel rate: 99.99% or more (each panel)
Projection lens			F 1.7 - 1.9 f= 24 - 29 mm
Light-source lamp			261 W
Image size (Projection distance)			40” min. to 300” max. (Projection distance 1.2 to 9.6 m)
Maximum		Computer signal	Maximum resolution: 1600 x 1200 dots (Analog)/compressed
resolution			Panel resolution: 1280 x 800 dots
		Video signal	NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
		Component	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
		signal	Panel resolution: 1280 x 800 dots
Computer/Component video input			[Signal type]		[Terminal type]	[Line]
			Analog RGB		Mini D-SUB 15-pin	2
			Digital RGB		DVI-D	1
Video input			[Signal type]		[Terminal type]	[Line]
			Video input		RCA	1
			S-Video input		S	1
Audio input			[Signal type]		[Terminal type]	[Line]
			RGB		Stereo mini jack (ø3.5)	2
			Video		RCA (L, R)	1
			S-video		RCA (L, R)	1
Monitor output			[Signal type]		[Terminal type]	[Line]
			Analog RGB		Mini D-SUB 15-pin	1
Audio output			[Signal type]		[Terminal type]	[Line]
			RGB/Video/S-video		Stereo mini jack (ø3.5)	1
Speaker			3 W Mono Round type ø4.5 cm x 1
Control terminal/Others			RS-232C (D-SUB 9-pin), USB terminal, LAN terminal (RJ-45)
Operating temperatures			+41°F (+5°C) to +95°F (+35°C)
Rated voltage			AC100 - 240 V, 50/60 Hz
Power consumption			3.9 A
Dimensions			333 mm (W) x 113 mm (H) x 272 mm (D) * Not including protrusion.
Weight			4.7 kg
Others		S-video input	Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
			Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
		Video input	Vp-p=1.0 V 75 Ω (negative sync)
		Component video	YCBCR: Vp-p=1.0 V 75 Ω (Y) (negative sync)
		input		Vp-p=0.7 V 75 Ω (CB, CR)
		Analog input	RGB:	Vp-p=0.7 V 75 Ω
			YCBCR: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (CB, CR)
			HD/CS: TTL-level (negative or positive polarity)
			VD:	TTL-level (negative or positive polarity)
		Digital input (DVI)	DVI-D interface (TMDS single link) with HDCP
		Audio input	350 mVrms, 10 kΩ or more
Replacement part
(Option/Not included in the box)
Spare lamp	VLT-XL650LP

EN-44