Kenmore 116.28014, 116.28015 owner manual Exhaust Filter Hepa, Motor Safety Filter Electrostatic

WARNING

Electrical Shock Hazard

Turn off and unplug vacuum cleaner from electrical outlet. Do not operate the vacuum cleaner without the motor

safety filter. Be sure the filter is dry and

properly installed to prevent motor failure and/or electrical shock.

MOTOR SAFETY FILTER

ELECTROSTATIC

This filter must be replaced when dirty. It

should be replaced regularly depending on use conditions_ The filter CANNOT be

washed as it will lose its dust trapping ability.

NOTE: See PARTS AND FEATURES for

Motor Safety Filter number,

I, Remove the bag as outlined in the BAG CHANGING section

,WARNING

Fire and/or Electrical Shock Hazard

Do not operate with a clogged exhaust filter or without the exhaust filter

installed, Do not operate without filter cover installed.

EXHAUST FILTER

HEPA

The exhaust filter cartridge must be replaced when dirty Replace the filter when

the entire surface area is covered evenly. The filter CANNOT be washed as it will

lose its dust trapping ability.

NOTE: See PARTS AND FEATURES for exhaust filter number

2. Lift the rubber		_ _L"_-_-.'>.:_-_-_-_-_-_-_-_-_
retainer and	pull	out
motor safety	filter	as
shown

white	side	out,		l_i_
facing	the dust		bag,
by sliding		it back			i!_!!
Into place		under	the	l, _:;	¢_!i
3. Re	ace the		fter,
ribs in the		bag			!I
cavity.	Tuck filter in			_'_'_'_"_"_"

rY so that it fits completely under the

rubber retainer.

4.Replace the bag as outlined in the BAG CHANGING section.

1.Press latch down to release the exhaust filter

cover from slot in

canister.Filter

Covet'

2. Pull filter

cover outward to remove from canister.

3, Remove the exhaust filter

using the recess as shown_

17