ExternalControlDeviceSetup
26.ISM Method (Command2:p)
To avoid having a fixed image remain on screen.
Transmission
[[j][p][ | ][Set Ia][ | ][Uata][Cr] | ] |
Data | O: Normal | 2: Orbiter | |
| 1 : White | wash | 3: Inversion |
Acknowledgement |
| ||
i[p] [ | ][Set IU][ | ][OK][Uata][x] | 1 |
27.Low Power (Command2:q)
To control the low power function on/off.
Transmission
[[j][q][ | ][Set ID][ | ][Data][Cr] | ] | |
Data O: Low | power off |
| ||
| 1 : Low | power on |
| |
Acknowledgement |
| |||
i[q] [ | ][Set IU][ | ][OK][Uata][x] | 1 | |
28. Orbiter Time Setting (Command2:r) To adjust orbiter operation time term.
Transmission
_][r][ | ][Set ID][ | ][Data][Cr] | i |
Data Min: 1 - Max: FE |
| ||
Acknowledqement |
| ||
i[r][ | ][Set IU][ | ][OK][Uata][x] | i |
29.Orbiter Pixel Setting (Command2:s)
I_ To adjust pixei number in orbiter function. Transmission
[_][s][ | ][Set IU][ ][Uata][Cr] | 1 | |
Data | Min:l |
| |
Acknowledqement |
| ||
[_ | ][Set IU][ | ][OK][Uata][x] | 1 |
30. Picture Size Setting for Double Window
mode (Command2:t)
To adjust main window size in Double Window mode. Transmission
I[j][t][ ][Set | IU][ | ][Uata][Cr] | I |
Data Min: | 0 _ | Max: 14 |
|
®Refer to 'Real data mapping1'. See page 35. Acknowledgement
[_ | ][Set ID][ ][OK][Data][x] | 1 |
31. Auto Configure (Command2:u)
I_ To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
Transmission
_][u][ | ][Set IU][ ][Uata][Cr] | 1 |
Data | 1: To set |
|
Acknowledqement |
| |
i[u][ | ][Set IU][ ][OK][Uata][x] | ] |
32. Tune command (Command: m a)
I_ Tune channel to following physical number
Transmission
i[m][a][ ][Set ID][ ][DataO][ ][Data1][ ][Data2][ ][Data3][Cr]
Data O: Air: 02 _ 45, Cable: 01, OE _ 7D 1:0
2:0
3:High
Low
Acknowledgement
i[a][ ][Set IU][ ][OK][UataO][ ][Data1][ ][Data2][ ][Uatag][x] i
33.Channel Add/Del (Command: m b)
To add and delete the channels
Transmission
I[m][b][ ][Set IU][ ][Uata][Cr]I
Data O: Channel Memory
1: Channel Erase
Acknowledqement
[[b][ ][Set IU][ ][OK][Uata][x] | ] |
34. Key (Command: m c)
To send IR remote key code
Transmission
i[m][c][ ][Set ID][ ][Data][Cr]
Data Key code: Refer to page 40.
Acknowledgement
i[c][ ][Set ID][ ][OK][Data][x]
38 Plasma TV
