LG Electronics RU-42PX10C manual Bass Command2s, Command2t, Command2u, Red Adjustment Command2v

18.Bass (Command2:s)

To adjust			bass.
You can also adjust bass in the Sound menu.
Transmission
i[k][s][		][Set	IU][	][Uata][Cr]		i
Data Min: 0 - Max: 64
		® Refer to 'Real data mapping 1 '.See page 35.
Acknowledgement
i[s][	][Set ID][ ][OK][Data][x]					i
19.	Balance		(Command2:t)
To adjust			balance.
You can also adjust balance in the Sound menu.
Transmission
i[k][t][		][Set	ID][	][Data][Cr]		i
Data Min: 0 - Max: 64
		® Refer to 'Real data mapping 1 '.See page 35.
Acknowledgement
i[t][ ][Set ID][ ][OK][Data][x]						i
20.	Color		Temperature		(Command2:u)
To adjust			color temperature.
You can also adjust ACC in the Picture menu.
Transmission
I[k][u][		][Set	ID][	][Data][Cr]		I
Data		O: Cool		1: Normal	2: Warm	3: Off
Acknowledqement
i[u][	][Set IU][ ][OK][Uata][x]					i

21. Red Adjustment (Command2:v)

To adjust red in color temperature.

Transmission

i[k][v][ ][Set ID][ ][Data][Cr]	i
Data Min: 0 _ Max: 3C

®Refer to 'Real data mapping 3'as shown right. Acknowledgement

![v][ ][Set ID][ ][OK][Data][x] !

22. Green Adjustment (Command2:w)

To adjust green in color temperature.

Transmission

i[k][w][ ][Set ID][ ][Data][Cr]i Data Min: 0 _ Max: 3C

®Refer to 'Real data mapping 3'as shown right. Acknowledqement

i[w][ ][Set ID][ ][OK][Data][x] i

External Control Device Setup

23. Blue Adjustment (Command2:$)

To adjust blue in color temperature.

Transmission

i[k][$][ ][Set IU][ ][Uata][Cr]1 Data Min: 0 _ Max: 3C

®Refer to 'Realdata mapping 3'as shown below. Acknowledqement

i[$][ ][Set ID][ ][OK][Data][x] I

*Real data mapping 3

0 :-30

1 : -29

2 :-28

1E:O

!

3A : +28

3B : +29

3C : +30

24.PIP Input Select (Command2:y)

To select inputsource for sub picture in PIP mode.

Transmission
I[k][y][	][Set ID][		][Data][Cr]		I
Data	0	:TV		4	• Component 2
	1	: Video	1	5	• RGB
	2	: Video	2	8	• DVI
	3	: Component 1
Acknowledgement
I[Y][ ][Set		ID][ ][OK][Data][x]
I_

25. Abnormal State (Command2:z)

To recognize an abnormal state.

Transmission

i[k][z][ ][Set ID][ ][FF][Cr]] Data FF:Read

Acknowledqement

I[z][ ][Set ID][ ][OK][Data][x]]

Data O: Normal (Power on and signal exist)

1:No signal (Power on).

2:Turn the monitor off with remote control.

3:Turn the monitor off with Sleep Time function.

4:Turn the monitor off with RS-232C function.

5:5V down.

6:AC down.

7:Turn the monitor off with Fan Alarm function.

8:Turn the monitor off with Off Time function.

9:Turn the monitor off with Auto Off function.

a: Turn the monitor off with On Time function.

(If you do not press any button within 2 hours after

the TV turns on with the On Timer function, the TV will automatically revert to standby mode.)

Owner's Manual 37