Brother FAX-T98 manual Remote control commands Detail Operation Changing Fax

Remote control commands			Detail Operation
95 Changing Fax			If you hear one long beep, the change is accepted.
Forwarding/Paging			If you hear three short beeps, you cannot change it
setting			because the conditions have not been met
			(Example: registering paging number).
	1	OFF
			You can register your fax forwarding number by
	2	Fax Forwarding
			using 4.FAX FWD NO. (See Changing the Fax
	3	Paging	Forwarding Number on page 8-20.) Once you have
			registered the number, the machine will
	4	FAX FWD NO.
			automatically turn to “FAX FWD:ON” mode. Then
			retrieve a Memory Status List by entering 9 6 1 to
			make sure that the Fax Forwarding number you
			registered is correct in the List.
96 Retrieve Fax			Enter the number of a remote fax machine to
			receive a report or stored fax messages. (See
	1	Memory Status
		List	Retrieving the Memory Status List on page 8-18
			and Retrieving Fax Messages on page 8-19.)
	2	Retrieve all FAX
	3	Erase FAX in	If you hear one long beep, you can erase the fax
		the memory	message from the memory.
97 Check the receiving			You can check whether your fax machine has
status			received any Document or Voice messages. If yes,
			you will hear one long beep. If no, you will hear
	1	Document
			three short beeps.
	2	Voice
98 Change Answer Mode			If you hear one long beep, you can change the
			answer mode. If you hear three short beeps, you
	1	TAD
			cannot change it. (Example: There is no TAD MSG
	2	FAX/TEL
			when you want to change to TAD mode.)
	3	FAX
90 Exit			After a long beep, you can exit remote control.

8 - 17 MESSAGE MANAGER