Setting the Beeper Volume

You can change the beeper volume. The default (original) setting is LOW. When the beeper is on, the fax machine beeps every time you press a key or make a mistake and when a fax is being sent or received.

1 Press Menu/Set, 1, 4.

4.BEEPER

(LOW, HIGH or OFF)

2 Press or to select your option.

3

4

When the LCD shows the option you want.

Press Menu/Set.

Press Stop.

Setting the Speaker Volume

You can adjust the speaker volume. Press Speaker Phone before

you can adjust the volume. Press then press or to adjust the volume level. The display shows the setting you are choosing. Each key press change the volume to the next setting. The new setting will remain until you change it again.

You can adjust the speaker volume while you are listening to your OGM (Outgoing Message) and ICMs (incoming messages).

If you turn Incoming Recording Monitor to OFF (Menu/Set, 8, 5), the Speaker for screening calls will be disabled and you won’t hear callers leaving messages. The volume for other operations

can still be controlled using .

Setting the Ring Volume

You can adjust the ring volume when your machine is idle. You can select a ring volume level or press until the ring is off.

Press then press or to adjust the volume level. With each key press, your machine rings so you can hear the current setting and the screen displays the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again.

4 - 5 INITIAL SETUP

Page 44
Image 44
Brother FAX-T98 manual Setting the Beeper Volume, Setting the Speaker Volume, Setting the Ring Volume